Page 2 of 4 · 77 products
Material
Nylon-CF Filament Price per kg
We track 81 Nylon-CF filament listings from 26 brands, with prices checked every 4 hours and normalized to a true cost per kilogram. Below are the lowest-priced 1kg and bulk Nylon-CF spools right now, and every listing sorted by price per kg.
81
listings tracked
26
brands
Every 4h
price updates
Best Nylon-CF Deals Today
The single cheapest 1kg spool and the cheapest bulk spool (2kg+) by price per kg right now. See all 81 listings ↓
Lowest Nylon-CF, 1kg spool
Lowest Nylon-CF, bulk (2kg+)
About Nylon-CF Filament
Nylon-CF is a base plastic filled with chopped carbon fiber. The fibers make parts stiffer and more dimensionally stable than the unfilled material, but they are abrasive: every carbon fiber filament needs a hardened steel or other wear resistant nozzle. Read the carbon fiber filament guide →
About the base material: Nylon (polyamide, PA) is a tough, wear-resistant engineering material for gears, hinges, and high-stress mechanical parts, and it is often reinforced with carbon or glass fiber for stiffness. It is strongly hygroscopic: nylon absorbs moisture from the air quickly, so it must be dried before printing and kept in a dry box for good results.
Nozzle temp 260-300°C
Nozzle type Hardened steel
Bed 100-120°C on PEI
Enclosure Strongly recommended
Best for strong, stiff engineering parts that must also tolerate heat.
Nozzle sizes for Nylon-CF
0.2 mm
Cannot use
Fibers clog it.
0.4 mm
Can use
Standard only, not high flow.
0.6 mm
Can use
Fewer clogs and less wear.
0.8 mm
Can use
Large, fast parts.
Based on Bambu Lab and Prusa guidance. See the nozzle types guide for brass vs hardened steel.
We compare Nylon-CF filament from 26 brands. Read the Nylon filament guide → Filament Cost Calculator →
Browse
77 shown
Nylon-CF Guides
Nylon Filament Guide
Nylon printing covered: PA6, PA66, PA12, and PA612 compared, optimal settings, moisture management, and what Nylon is actually built for.
Glass Fiber Filament Guide
What glass fiber fills like PETG-GF and PA-GF do, how they compare with carbon fiber, and the nozzle they need.
Carbon Fiber Filament Guide
What carbon fiber filament is actually for, how PLA-CF, PETG-CF, and Nylon-CF differ, and the hardened-nozzle setup they demand.
Nylon vs PETG
Nylon vs PETG compared: toughness, wear and heat resistance, moisture handling and live price per kg, so you can choose for functional parts.
Strongest 3D Printer Filament
The strongest 3D printer filaments are polycarbonate and nylon, with carbon fiber blends for stiffness. What each is best at, what they need, and live prices.
PA6 vs PA12 Nylon
PA6 vs PA12 nylon compared: moisture absorption, stiffness, toughness, heat resistance, ease of printing and live price per kg for each type of nylon.
The week's lowest prices, every Thursday.
One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.
✓ Best buy of the week
✓ Floor price per material
✓ One email a week
See what's in each issue