Polymaker Fiberon PA6-CF20 Carbon Fiber Nylon Filament 1.75mm, Black, 1kg | 20% Carbon Fiber Reinforced PA6 Filament, High-Strength Heat-Resistant PA6-CF Engineering 3D Printer Material
Compare all 2 Polymaker Nylon-CF 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 20% Carbon Fiber Reinforced PA6: Fiberon PA6-CF20 combines Nylon 6 with 20% carbon fiber for high stiffness, strength, dimensional stability, and strong layer adhesion. Designed for rigid functional parts, tooling, fixtures, and automotive or industrial prototypes.
- Engineering Performance After Annealing: Typical TDS values include 109.3 MPa dry X-Y tensile strength and an 8.64 GPa Young’s modulus. Heat deflection temperature reaches 215°C at 0.45 MPa after annealing at 100°C for 16 hours. Final-part performance may vary with design and printing conditions.
- Dry Before and During Printing: PA6 is moisture-sensitive. Dry the filament at 100°C for 10 hours before printing, then store and print below 20% relative humidity, ideally from a dry box. Proper moisture control helps reduce stringing, bubbles, rough surfaces, and inconsistent extrusion.
- Advanced Printer Setup Required: Use a 280–300°C nozzle, a 40–50°C build plate, and an all-metal hotend with the cooling fan off. A heated chamber is not required; room-temperature chamber conditions are listed in the TDS. Printing speeds up to 300 mm/s are possible with a properly tuned profile.
- Use a Wear-Resistant Nozzle: Carbon fiber is abrasive, so a hardened steel or ruby nozzle is required instead of a standard brass nozzle. For optimum heat resistance and dimensional stability, anneal printed parts at 100°C for 16 hours. Before long prints, confirm smooth filament routing and unrestricted spool rotation.
From the listing on Amazon.
View our other Polymaker listings here.
View our other Nylon-CF listings here.
Keep your filament dry, view our gear here.
Printing Polymaker Nylon-CF
Polymaker Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.