Page 1 of 1 · 2 products
Brand
TINMORRY PLA-CF Filament Price per kg
We track 2 TINMORRY PLA-CF listings, with prices checked every 4 hours and normalized to a true cost per kilogram. Below are the lowest-priced 1kg and bulk PLA-CF spools right now, and every listing sorted by price per kg.
2
listings tracked
Every 4h
price updates
Best TINMORRY PLA-CF Deals Today
The single cheapest 1kg spool and the cheapest bulk spool (2kg+) by price per kg right now. See all 2 listings ↓
Lowest PLA-CF, 1kg spool
About PLA-CF Filament
PLA-CF is a base plastic filled with chopped carbon fiber. The fibers make parts stiffer and more dimensionally stable than the unfilled material, but they are abrasive: every carbon fiber filament needs a hardened steel or other wear resistant nozzle. Read the carbon fiber filament guide →
About the base material: PLA (polylactic acid) is the most widely used 3D printing filament. It prints at low temperatures, barely warps, and holds fine detail, so it runs on almost any FDM printer without an enclosure. That ease of use makes it the default for prototypes, miniatures, and indoor display parts. Its trade-offs are heat and impact resistance: PLA softens in a hot car or direct sun, so it is a poor fit for functional outdoor or high-stress parts.
Nozzle temp 210-240°C
Nozzle type Hardened steel
Bed 45-65°C
Enclosure Not needed
Best for stiff, matte display pieces, desk and camera accessories, and light-duty brackets that never see heat.
Nozzle sizes for PLA-CF
0.2 mm
Cannot use
Fibers clog it.
0.4 mm
Can use
Standard only, not high flow.
0.6 mm
Can use
Fewer clogs and less wear.
0.8 mm
Can use
Large, fast parts.
Based on Bambu Lab and Prusa guidance. See the nozzle types guide for brass vs hardened steel.
We compare PLA-CF filament from 31 brands. Read the PLA filament guide → Filament Cost Calculator →
About TINMORRY
TINMORRY is one of the filament brands we track, with 223 listings on the tracker spanning PLA, PETG, PETG-GF, and TPU, plus 11 more materials.
TINMORRY filament by material:
Browse
2 shown
TINMORRY PLA-CF Guides
PLA Filament Guide
Everything to know about PLA: properties, print settings, brand differences, and when PLA is the right material.
HT-PLA Filament Guide
What high temperature PLA is, how annealing raises its heat resistance, and how to print and anneal it.
LW-PLA Filament Guide
How lightweight foaming PLA works, how temperature and flow set its weight, and when to use it.
Carbon Fiber Filament Guide
What carbon fiber filament is actually for, how PLA-CF, PETG-CF, and Nylon-CF differ, and the hardened-nozzle setup they demand.
PLA vs PETG
PLA vs PETG compared: print settings, strength, heat resistance, outdoor use and live price per kg for both, so you can pick the right filament for the job.
PLA vs ABS
PLA vs ABS compared: print settings, heat resistance, toughness, fumes and live price per kg for both, so you can pick the right filament.
The week's lowest prices, every Thursday.
One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.
✓ Best buy of the week
✓ Floor price per material
✓ One email a week
See what's in each issue