TINMORRY PLA-CF Carbon Fiber Filament 1.75mm, 1 KG, Carbon Blue | Carbon Fiber Reinforced PLA, High Rigidity & Strength, Lightweight, Reduced Layer Visibility, Functional Parts
Compare every TINMORRY PLA-CF listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Superior Mechanical Properties: Containing chopped carbon fiber,TINMORRY PLA-CF filament 1.75mm is stronger and stiffer than ordinary PLA, making it more suitable for printing general engineering parts or models requiring impact strength.
- Unique Texture & Matte Finish: Effectively hides the layer lines, our PLA-CF 3d printing filament gives the prints a smoother and higher quality appearance. With matte printing surface, it is the ideal filament for printing models with matte appearance.
- Dimensional Stability & Easy support removal: Compared to traditional PLA, PLA-CF filament shrinks less and does not warp, allowing for a perfect fit between printed models. TINMORRY carbon fiber 3d printer filament is designed to support itself. It is easier to remove than regular PLA filament,while maintaining a smooth support surface.
- Printing Settings: 1.For better printing quality, please dry it before printing and keep it sealed after use. 2. Please use wear-resistant steel nozzles(≥0.4 mm, 0.6mm is better) instead of ordinary brass nozzles. 3. Print Temperature:210-240℃ , Bed Temperature:65-70℃ , Print Speed: 30-300mm/s.
- High-speed Printing: TINMORRY PLA-CF filament is as easy to print as regular PLA. Compared to other brands of PLA-CF filament, it can print 3-5 times faster at a speed of 300mm/s. At high printing speeds, it prints smoothly and stably without clogging. BAMBU LAB FDM 3D printers are highly recommended! If your printer is from other brand, please contact us to get the filament profile.
From the listing on Amazon.
View our other TINMORRY listings here.
View our other PLA-CF listings here.
Keep your filament dry, view our gear here.
Printing TINMORRY PLA-CF
TINMORRY PLA-CF in Blue is PLA filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain PLA, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for PLA-CF, which usually prints a little hotter than plain PLA. PLA-CF is best suited to stiff, matte display pieces, desk and camera accessories, and light-duty brackets that never see heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.