Creality PLA Filament 1.75mm, 3D Printer Filament Bundle 4x1KG Spools | Accuracy ±0.02mm, Neatly Wound No Tangle Low Warp, Fast Flow PLA for Most FDM 3D Printers, Red & Yellow & Blue & Green
Compare all 61 Creality PLA Multicolor Pack 4kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 4 COLORS, 4 FULL KILOS, NO MID-PROJECT RUNOUT: A 4-pack PLA filament bundle of Red & Yellow & Blue & Green 1kg spools gives you 4kg (about 1,320m) of matched 1.75mm PLA. Load every slot of your AMS or multi-spool rack at once and stop reordering single rolls mid-print.
- ±0.02MM DIAMETER CONTROL, LAYER AFTER LAYER: Every spool is checked during winding and held to ±0.03mm, so the extruder lays an even bead from the first layer to the last. That means smooth walls, accurate fit on press-in parts, and fewer failed prints.
- LOW SHRINKAGE, LOW WARP, STURDY PARTS: A low-shrink PLA compound keeps bases flat and tall walls square on open-frame printers with no enclosure. Print at 190-220C nozzle and 50-60C bed, and the enhanced-toughness formula resists cracking when parts are snapped, dropped or handled daily.
- NEATLY WOUND, TANGLE-FREE, SHIPPED DRY: Machine-wound spools with clean layer alignment feed smoothly through Bowden and direct-drive extruders. Each roll is vacuum sealed with a desiccant pack, so it arrives dry - no snapping filament, no mid-print jam, and low odor while it prints.
- FAST FLOW, WIDE FIT, 12-MONTH SUPPORT: Higher melt flow keeps up with faster print speeds, and the standard 8.00in spool, 2.50in width and 2.20in hub drop into Ender 3, K1 Max, Bambu Lab, Prusa, Anycubic and ELEGOO holders. Backed by Creality 12-month support with 24-hour replies
From the listing on Amazon.
View our other Creality listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing Creality PLA
Creality PLA in Blue runs on the PLA profile below, and this listing is a 4kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.