AMOLEN Rapid PETG Transparent 3D Printer Filament 1.75mm Transcucent | 500mm/s High Speed Strong Toughness Christmas Multicolor Bundle Black/Purple/Red/Orange 250gx4
Compare all 10 AMOLEN PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【High Performance & Compatibility】 The AMOLEN PETG Bundle (Black/Purple/Red/Orange) combines the advantages of PLA and ABS, offering PLA-like ease of printing and ABS-like mechanical properties, including enhanced impact resistance and superior layer adhesion. Recommended Printing Temperature: 230°C–260°C.
- 【No Clogging & No Bubbles】 AMOLEN filaments are thoroughly dried and carefully vacuum-sealed to protect against moisture and dust, helping prevent clogging and bubbling during printing. AMOLEN PETG is designed to be perfectly compatible with most 1.75mm FDM 3D printers, especially suitable for 3D printing enthusiasts.
- 【Tangle-Free & Neatly Wound】 Every PETG filament spool is tightly and neatly wound using full mechanical winding, effectively minimizing tangles, filament snapping, and line breakage.
- 【Dimensional Accuracy & Consistency】 Advanced CCD diameter measurement and a self-adaptive control system ensure these PETG filaments meet strict tolerances. Diameter: 1.75mm; dimensional accuracy: 98% within +/- 0.02mm, without exaggeration.
- 【Wide Compatibility & Color Selection】 AMOLEN filaments integrate seamlessly with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors (Transparent or Basic), offering a spectrum of possibilities for your unique creations.
From the listing on Amazon.
View our other AMOLEN listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing AMOLEN PETG
AMOLEN PETG in Black runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.