eSUN PETG+ Filament 1.75 mm, Black 2 kg + Grey 2 kg | PETG filament with improved impact resistance and heat resistance, 1 kg per spool, 4 spools, 3D printing filament

Product Details

• PETG+ filament: eSUN PETG+ with its excellent impact resistance, excellent transparency and good processability, PETG provides a stable and reliable basis for your creative 3D printing projects and thus allows you to easily convert your ideas into finished products.
• High compatibility: eSUN PETG+ combines high toughness and excellent mechanical properties (such as ABS) with heat resistance, robustness, easy printability and minimal deformation (such as PLA). It is widely used in prototype construction, translucent models and architectural decoration.
• 【Stable dimensional tolerance】: eSUN PETG+ has minimal tolerance and low deformation to ensure consistent feed and stable prints, good layer connection, less threading, no bubbles, no cracks, no deformation, which allows excellent surface quality and high precision.
• Tangle free and no plugging: eSUN PETG+ has good roundness and tight diameter tolerance, good winding, does not overlap or tangle. And it melts well, absorbs smoothly and consistently without clogging the nozzle or extruder.
• Note: The PETG+ material has a slightly higher water absorption capacity. If you start printing again after a long print break, we recommend drying the material at 60°C for at least 8 hours first. Since the PETG+ material sticks to the nozzle relatively easily, we recommend increasing the return suction when printing, disabling the Z-axis raise, reduce the flow percentage and slightly lower the printing speed.

From the listing on Amazon.

View our other eSUN listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing eSUN PETG

eSUN PETG in Black runs on the PETG profile below, and this listing is a 4kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.