IEMAI Matte PETG Filament 1.75mm, 1kg Wood Brown Compatible with Bambu Lab

Product Details

• 1️⃣【Premium Matte Surface Finish】IEMAI wood brown matte PETG filament delivers a smooth, low-gloss surface with reduced visible layer lines for a clean, professional matte finish. Ideal for cosplay props, decorative models, functional prototypes, and engineering parts
• 2️⃣【Stronger & More Durable Than PLA】Our matte PETG combines the easy printing properties of PLA with the durability of ABS, provides higher impact & Heat resistance, and offers excellent toughness
• 3️⃣【Consistent Diameter & Smooth Extrusion】+/-0.02mm dimensional accuracy and a neatly wound spool ensure stable feeding and smooth extrusion of our 1.75mm matte 3D printer filament, helping reduce nozzle clogging
• 4️⃣【Strong Adhesion & Stable Printing】This matte filament provides excellent interlayer adhesion and bed adhesion to help reduce warping, corner lifting, and print failures
• 5️⃣【Wide Printer Compatibility】IEMAI PETG filament is compatible with most 1.75mm FDM printers and Bambu Lab AMS, including Bambu Lab A1, P1, X1 series, Creality Ender and K1 series, Anycubic Kobra series, FlashForge Adventurer series, and more
• 6️⃣【Printing Tips and Settings】① Dry matte PETG filament at 60°C for 5–8 hours before printing. ② For Bambu Lab printers, use the PETG Basic profile; For other FDM printers, use a 60–70°C build plate, 230–270°C nozzle, and printing speed ≤150mm/s

From the listing on Amazon.

View our other IEMAI listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing IEMAI PETG

IEMAI PETG in Matte Brown runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.