SUNLU 2KG Bundle PLA Matte 1.75mm, Matte Surface 3D Printer Filament | Frosted Matte Finish Hides Layer Lines, 2 Pack 1kg Spool (2.2lbs) Reusable Spool, Fit Most FDM Printer (Black+White)
Compare all 44 SUNLU PLA Multicolor Pack 2kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Smooth Matte Finish】- SUNLU MATTE PLA produce a beautiful matte, low gloss and smooth finish, achieving a frosted texture that conceals layer lines.
- 【Wound Neatly 3D Filament】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound 3D Printer Filament. No knot, no winding, improve printing efficiency.
- 【Dimensional Accuracy & Consistency】- PLA MATTE Filament Dimensional Accuracy +/- 0.02mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing.
- 【NO Clogging & NO Bubble】- SUNLU PLA Filament is manufactured in dry and dust-free environment and pack with vaccuumed sealed package, away from any dampness or air, no clogging and bubbling problems.
- 【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
- 【Recommend Settings】- We recommend printing nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.
From the listing on Amazon.
View our other SUNLU listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing SUNLU PLA
SUNLU PLA in Matte White runs on the PLA profile below, and this listing is a 2kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.