Page 1 of 1 · 1 products
Brand
yxpolyer PC-CF Filament Price per kg
We track 1 yxpolyer PC-CF listings, with prices checked every 4 hours and normalized to a true cost per kilogram. Below are the lowest-priced 1kg and bulk PC-CF spools right now, and every listing sorted by price per kg.
1
listings tracked
Every 4h
price updates
Best yxpolyer PC-CF Deals Today
The single cheapest 1kg spool and the cheapest bulk spool (2kg+) by price per kg right now. See all 1 listings ↓
About PC-CF Filament
PC-CF is a base plastic filled with chopped carbon fiber. The fibers make parts stiffer and more dimensionally stable than the unfilled material, but they are abrasive: every carbon fiber filament needs a hardened steel or other wear resistant nozzle. Read the carbon fiber filament guide →
About the base material: PC (polycarbonate) is one of the strongest and most heat-resistant materials available on a desktop FDM printer, holding its shape at temperatures that soften PLA or PETG. It demands the most in return: an all-metal hotend, an enclosure (heated for large parts), and a dry spool, since even small amounts of absorbed moisture cause bubbles and weak layers. PC-ABS, PC-GF, and other PC blends trade some of that peak performance for a print that behaves closer to ABS.
Nozzle temp 250-290°C
Nozzle type Hardened steel
Bed 90-120°C
Enclosure Required
Best for high-strength, heat-resistant engineering parts; PC-ABS/PC-GF/PC-CF blends print easier than pure PC at some cost to peak performance.
Nozzle sizes for PC-CF
0.2 mm
Cannot use
Fibers clog it.
0.4 mm
Can use
Standard only, not high flow.
0.6 mm
Can use
Fewer clogs and less wear.
0.8 mm
Can use
Large, fast parts.
Based on Bambu Lab and Prusa guidance. See the nozzle types guide for brass vs hardened steel.
We compare PC-CF filament from 4 brands. Read the Polycarbonate (PC) filament guide → Filament Cost Calculator →
About yxpolyer
yxpolyer is one of the filament brands we track, with 95 listings on the tracker spanning PLA Plus, ABS, ASA, and TPU, plus 9 more materials.
yxpolyer filament by material:
Browse
1 shown
yxpolyer PC-CF Guides
Polycarbonate (PC) Filament Guide
What polycarbonate filament is for: extreme strength and heat resistance, the high temperatures and drying it demands, and where PC blends make sense.
ABS vs PC
ABS vs polycarbonate compared: heat resistance, strength, printing requirements and live price per kg, so you can choose for demanding parts.
Strongest 3D Printer Filament
The strongest 3D printer filaments are polycarbonate and nylon, with carbon fiber blends for stiffness. What each is best at, what they need, and live prices.
Best Heat Resistant Filament
The most heat resistant 3D printer filaments: polycarbonate, ASA, ABS and PETG compared by the temperatures they handle, with live prices.
Best Filament for Car Parts
The best filament for 3D printed car parts is ASA, with ABS and polycarbonate for hotter spots. What survives a hot car, what to avoid, and live prices.
Filament Settings Cheat Sheet
Nozzle and bed temperatures, enclosure needs, drying settings and heat resistance for every common filament in one table.
The week's lowest prices, every Thursday.
One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.
✓ Best buy of the week
✓ Floor price per material
✓ One email a week
See what's in each issue