3D-Fuel PETG Grey 1kg

3D-Fuel

3D-Fuel Pro PETG Filament 1.75mm 1kg, Industrial Gray | 100% Virgin PETG, Prints Nearly as Easily as PLA, AMS Compatible Spool, Made in USA

PETG Grey 1kg
Total Size
1KG
Color(s)
Price / kg
$26.95/kg
Total
$26.95

Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.

Product Details

  • PRINTS NEARLY AS EASILY AS PLA: Pro PETG gives you strong layer bonds, almost no warping and very little odor. No enclosure or heated chamber is needed, so it runs on open-frame and enclosed printers alike.
  • 100% VIRGIN PETG RESIN: Made from 100% virgin PETG resin, with no recycled content in this spool. A dependable everyday material for functional parts, fixtures, brackets and household prints.
  • SIMPLE SETTINGS: Print at 245-265°C nozzle and 70-80°C bed, at 50-150 mm/s. Use textured PEI, or a glue stick as a release layer on smooth PEI. For best results, dry at 65°C for 8-12 hours before printing.
  • AMS-COMPATIBLE 1KG SPOOL: A full 1kg of 1.75mm filament on a spool sized for the Bambu Lab AMS, so it drops into multi-material setups as well as standard spool holders.
  • MADE IN FARGO, NORTH DAKOTA, USA: Extruded in our own factory. 3D-Fuel publishes print settings, troubleshooting guides and data sheets for Pro PETG, and our support team answers questions directly.

From the listing on Amazon.

View our other 3D-Fuel listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing 3D-Fuel PETG

3D-Fuel PETG in Grey runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Nozzle temp
230-260°C
Bed
70-90°C
Enclosure
Optional
Drying
60-65°C, 6-8h
Heat resistance
~70°C
Cooling fan
20-60%
Difficulty
Easy

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Nozzle type
Brass or hardened steel
0.2 mm
Can use
Fine detail, slow.
0.4 mm
Can use
The standard size.
0.6 mm
Can use
Faster, stronger walls.
0.8 mm
Can use
Large, fast parts.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.

The week's lowest prices, every Thursday.

One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.

✓ Best buy of the week ✓ Floor price per material ✓ One email a week
See what's in each issue