FILAGALAXY Hyper PLA 1.75mm, High Speed 3D Printer Filament, 1kg White | Tested up to 800 mm/s, MagnoCal and StearaShield additives, +/- 0.02 mm tolerance, glossy finish, dried and vacuum sealed
Compare every FILAGALAXY PLA listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- TESTED UP TO 800 MM/S: High-flow PLA formula tested at print speeds up to 800 mm/s; keeps extrusion steady on fast CoreXY printers with high-flow hotends; recommended nozzle 190-220°C, bed 50°C, no glue needed on most plates
- MAGNOCAL + STEARASHIELD: Two in-house additives in every spool; MagnoCal mineral system keeps melt flow consistent at high flow rates, StearaShield lubricant cuts nozzle friction to help lower clog risk during fast feeding
- +/- 0.02 MM TOLERANCE: In-line Zumbach laser gauge monitors diameter during production for consistent 1.75 mm filament; even feeding matters most at high speed and helps reduce under-extrusion and layer gaps
- GLOSSY FINISH, CRISP DETAIL: Classic glossy PLA surface with clean layer lines and sharp edges; a practical choice for print farms, batch production, rapid prototypes, display models, cosplay props and desk accessories
- DRIED AND VACUUM SEALED: Each 1 kg (2.2 lb) spool is dried, vacuum sealed with desiccant, machine wound and hand inspected; works with most 1.75 mm FDM 3D printers, including Bambu Lab, Creality, Prusa and Elegoo models
From the listing on Amazon.
View our other FILAGALAXY listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing FILAGALAXY PLA
FILAGALAXY PLA in White runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.