VERTEXFIL PETG 3D Printer Filament 1.75, 1KG Spool(2.2lbs), Light Gray | Ultra-Low Stringing, Exceptional Layer Adhesion, High Toughness / Strong,Neatly Wound / Clog-Free, Moistureproof, Odorless

Product Details

• 【±0.02mm Precision & Clog-Free Feeding】 VERTEXFIL PETG 1.75mm is laser-measured to a strict ±0.02mm diameter tolerance and fully inspected spool by spool, ensuring smooth, consistent feeding through any 1.75mm extruder — no jams, blobs, or under-extrusion, just a clean melt flow from first layer to last
• 【Tougher Than PLA, Easier Than ABS】 With high impact resistance and an elongation-at-break that lets parts bend instead of snap, VERTEXFIL PETG is built for functional prints — brackets, gears, drone frames, and tool holders — that take drops and daily stress where PLA cracks and ABS fights you on the bed
• 【Hassle-Free Printing, Minimal Warping】 Blending PLA's forgiving printability with real durability, our PETG delivers strong layer adhesion and low shrinkage on a standard 245–255°C nozzle / 75–85°C bed profile. No enclosure needed, no warped corners, no failed first layers — beginner-friendly and pro-fast
• 【Glossy, Smooth, Consistent Finish】 A glass-like, smooth surface with rich, even color from the first meter to the last — every spool delivers the same vibrant, detailed result your design deserves, lot after lot, with no dull patches or surface defects
• 【Fresh Out of the Box & Widely Compatible】 Each spool is oven-dried, vacuum-sealed with desiccant, and moisture-proofed to block dust and humidity — no popping, no brittleness. It drops straight into Bambu Lab AMS, Creality Ender, Anycubic, Elegoo, Prusa, and most FDM printers

From the listing on Amazon.

View our other VERTEXFIL listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing VERTEXFIL PETG

VERTEXFIL PETG in Grey runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.