Coolcreat PETG Black 1kg

Coolcreat

Coolcreat PETG Filament 1.75mm, Ultra Tough, Heat Optimized, 1kg Spool PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers-Black

PETG Black 1kg

Compare all 7 Coolcreat PETG 1kg listings →

Total Size
1KG
Color(s)
Price / kg
$19.99/kg
Total
$19.99

Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.

Product Details

  • STRONG & DURABLE PETG MATERIAL: Made for functional 3D prints that need a balance of strength, toughness, and everyday durability. Coolcreat PETG filament is a practical choice for brackets, organizers, tool holders, enclosures, and other useful parts where durability matters
  • SMOOTH & CONSISTENT EXTRUSION: Designed to support steady material feeding and consistent extrusion when used with suitable printing settings. For best results, keep the filament dry, use a clean nozzle, and fine-tune temperature and retraction settings for your printer
  • PRECISE 1.75MM FILAMENT DIAMETER: Consistent filament diameter helps support predictable extrusion and dependable print results. Check that your printer supports 1.75mm filament before purchasing. Actual dimensional tolerance should be confirmed by product specifications
  • RELIABLE LAYER ADHESION: PETG is a versatile material for prints that require solid layer bonding and a durable finish. Optimize nozzle temperature, cooling, and print speed to achieve the right balance of layer adhesion, surface quality, and dimensional accuracy
  • FOR MOST 1.75MM FDM PRINTERS: Recommended initial settings: nozzle temperature 220–250°C, heated bed temperature 70–90°C, and print speed 30–300 mm/s. Dry the filament if necessary. It is advised to begin by using the parameters recommended for this specific filament and printer, then fine-tune them based on your particular equipment and the desired final print quality

From the listing on Amazon.

View our other Coolcreat listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing Coolcreat PETG

Coolcreat PETG in Black runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Nozzle temp
230-260°C
Bed
70-90°C
Enclosure
Optional
Drying
60-65°C, 6-8h
Heat resistance
~70°C
Cooling fan
20-60%
Difficulty
Easy

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Nozzle type
Brass or hardened steel
0.2 mm
Can use
Fine detail, slow.
0.4 mm
Can use
The standard size.
0.6 mm
Can use
Faster, stronger walls.
0.8 mm
Can use
Large, fast parts.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.

The week's lowest prices, every Thursday.

One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.

✓ Best buy of the week ✓ Floor price per material ✓ One email a week
See what's in each issue