JG MAKER Silk PLA Filament for 3D Printer 1.75mm +/- 0.03mm, Shiny Filament 1kg (2.1lbs)/Spool, Gold

Product Details

• Stunning Glossy Silk Finish Without Post-Processing:JG MAKER Silk PLA+ filament produces a premium smooth, satin and high-gloss surface directly after printing. No polishing, sanding, or painting is required. It perfectly restores delicate model textures and is ideal for artistic sculptures, decorative ornaments, cosplay props, and all high-end visual 3D printing projectsv
• High Precision & Stable Jam-Free Printing：This 1.75mm silk PLA filament maintains a strict dimensional accuracy of ±0.02mm with ultra-low diameter deviation. It ensures consistent extrusion and seamless feeding during printing, effectively avoiding nozzle clogging, layer jitter and printing interruptions. It performs stably for both intricate complex models and daily prototype printing
• High-Purity Material & Optimized Printing Parameters：Made of upgraded high-purity PLA material, JG MAKER silk filament features stronger layer adhesion, lower shrinkage and fewer printing defects, delivering ultra-fine and highly accurate finished prints. Recommended printing settings: Nozzle Temperature: 205–215°C, Hot Bed Temperature: 60–80°C, Printing Speed: 30–60mm/s. A slower printing speed can further enhance the exquisite silky gloss effect.
• Neat Winding & Tangle-Free Long-Time Printing：Adopting precise mechanical winding technology and strict manual double inspection, every JG MAKER filament spool is evenly arranged with moderate tension. It greatly reduces filament tangling, looping and breakage, ensuring smooth and continuous material feeding even during long-hour printing, effectively improving printing success rate.
• Vacuum Moisture-Proof Package & Reusable Spool Design：Each filament spool is vacuum-sealed with desiccant to isolate moisture, prevent bubble generation and avoid printing defects caused by damp materials. Equipped with a durable reusable spool for easy refilling after use. It is widely compatible with mainstream refillable 3D printers brings more eco-friendly and cost-effective printing experience.

From the listing on Amazon.

View our other JG MAKER listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing JG MAKER PLA

JG MAKER PLA in Silk Gold runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.