EONO3D Yellow PETG Filament 1.75mm, 1kg (2.2lb), 3D Printer Filament | PETG filament 1kg (2.2lbs), high strength, low stringing, layer adhesion, ±0.02mm accuracy for Tough Parts & FDM print
Compare all 7 EONO3D PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- ⭐ ①Low Stringing & Strong Layer Adhesion— Optimized melt flow helps minimize stringing and supports excellent interlayer bonding, producing clean surfaces and reliable, low-warp prints for functional parts and mechanical applications..
- ⭐ ②High Toughness for Functional & Mechanical Prints— This PETG filament offers greater toughness and impact resistance than standard PLA, a practical choice for brackets, enclosures, tools, and parts that must withstand stress and repeated use.
- ⭐ ③±0.02mm Dimensional Accuracy— Manufactured with precise diameter control to maintain consistent ±0.02mm tolerance. Ensures smooth extrusion, stable flow, and accurate dimensions for demanding mechanical and technical prints.
- ⭐ ④Moisture Resistant & Vacuum Sealed— PETG naturally resists moisture better than PLA, and each spool is vacuum-sealed with desiccant to preserve dryness. Reduces bubbling, surface defects, and print failures—ready to print out of the box.
- ⭐ ⑤ Wide Compatibility & Print Settings— Works with most 1.75mm FDM 3D printers. Recommended settings: nozzle 230-260°C, bed 50-70°C, speed 120-180mm/s. Spool dimensions: 200mm outer diameter, 54mm bore — neatly wound to help prevent tangles.
From the listing on Amazon.
View our other EONO3D listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing EONO3D PETG
EONO3D PETG in Yellow runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.