Officeflow PETG White Filament 1.75mm, 2-Pack 2kg, High Toughness, Glossy | 3D Printer Filament, 2x White PETG 1kg Spools 660m Total, Tough & Heat Resistant, Warp-Free Glossy Finish, Mechanical Parts
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- PLA EASE, ABS STRENGTH: Officeflow white PETG filament prints as easily as PLA with ABS-level strength. This 3d printer filament is warp-free and dimensionally stable, with impact, heat and chemical resistance for functional and outdoor parts
- DIMENSIONAL ACCURACY ±0.02MM: Laser-checked PETG filament 1.75mm held to a ±0.02mm tolerance. Neat winding keeps coils tangle-free and clean-layered - smooth feeding, minimal stringing, first meter to last
- IMPACT TOUGH & HEAT RESISTANT: Absorbs knocks without cracking and handles higher temperatures than PLA. Built for brackets, gears, protective cases, jigs and outdoor gear that PLA cannot handle
- HIGH-GLOSS FINISH & STRONG LAYERS: A glossy surface with fewer visible layer lines gives prints a premium look straight off the bed. Strong layer adhesion keeps parts solid, low-warp and crack-free
- VACUUM-SEALED & MOISTURE-FREE: Factory-dried PETG filament, sealed with desiccant against moisture and dust. No bubbles, clogs or nozzle jams - print straight from the box, no pre-drying needed
- FITS MOST FDM 3D PRINTERS & PRINT-READY: This PETG 3d printer filament runs on most 1.75mm FDM printers and multi-material systems - AMS-ready, no enclosure needed. Nozzle 230-260°C, hot bed 60-80°C, speed 50-200mm/s. Dry at 60±5°C for 4-8h
- WHAT'S IN THE BOX: 2 x 1kg (2.2lbs) spools of PETG white filament, 660m total, vacuum-sealed with desiccant. A go-to white in stock for parts, jigs and everyday projects. Backed by responsive Officeflow support
From the listing on Amazon.
View our other Officeflow listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing Officeflow PETG
Officeflow PETG in White runs on the PETG profile below, and this listing is a 2kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.