ELEGOO Nylon-CF Black 1kg

ELEGOO

ELEGOO PA612-CF Carbon Fiber Nylon Filament 1.75mm Black 1kg | Low Moisture Absorption, Stronger than PA12, HDT 182°C (Annealed), High Stiffness & Dimensional Stability, 1KG(2.2lbs) Spool

Nylon-CF Black 1kg

Compare all 4 ELEGOO Nylon-CF 1kg listings →

Total Size
1KG
Color(s)
Price / kg
$36.99/kg
Total
$36.99

Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.

Product Details

  • Low Moisture Sensitivity: Low moisture absorption helps maintain consistent material properties in humid conditions, making PA612-CF a reliable choice for functional parts exposed to moisture.
  • High Strength and Rigidity: Carbon fiber reinforcement delivers the strength and stiffness needed for demanding functional parts — from jigs and fixtures to brackets and load-bearing components.
  • High-Temperature Performance: With heat resistance up to 182 °C, printed parts maintain reliable performance under elevated temperatures — ideal for automotive components, electrical enclosures, and other heat-exposed parts.
  • Exceptional Dimensional Stability: Print larger, more accurate parts with less warping and shrinkage. Excellent dimensional stability helps ensure precise fits and dependable assemblies.
  • Refined Surface Finish: A subtle textured appearance helps reduce the visibility of layer lines, giving printed parts a clean, professional look straight off the printer.

From the listing on Amazon.

View our other ELEGOO listings here.

View our other Nylon-CF listings here.

Keep your filament dry, view our gear here.

Printing ELEGOO Nylon-CF

ELEGOO Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Nozzle temp
260-300°C
Bed
100-120°C on PEI
Enclosure
Strongly recommended
Drying
80°C, 8-12h
Heat resistance
~180-215°C (annealed)
Cooling fan
0-40%
Difficulty
Advanced

Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.

Nozzle type
Hardened steel
0.2 mm
Cannot use
Fibers clog it.
0.4 mm
Can use
Standard only, not high flow.
0.6 mm
Can use
Fewer clogs and less wear.
0.8 mm
Can use
Large, fast parts.

Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.

The week's lowest prices, every Thursday.

One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.

✓ Best buy of the week ✓ Floor price per material ✓ One email a week
See what's in each issue