Vividcrate Rigidity Wear-Resistant Printer Filament 1KG Black | PAHT Nylon 12 Filament 1.75mm,(White,0.5kg)
Compare every Vividcrate Nylon listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Rigidity & Strength: Flexural modulus over 3300Mpa and tensile strength above 80Mpa, providing excellent dimensional stability and load-bearing capacity for functional prototypes and end-use parts.
- Low Water Absorption: Absorbs only one-fifth the moisture of standard nylon 6, ensuring printed parts maintain consistent mechanical properties and dimensional accuracy even in humid environments.
- Superior Thermal : Heat deflection temperature of 109°C with a maximum continuous use temperature of 160°C, ideal for applications requiring heat resistance and long-term thermal aging stability.
- Excellent Electrical Insulation: Surface and insulation resistance greater than 10^12 ohms, minimally affected by temperature and humidity, suitable for electronic housings and electrical components.
- Easy Printing & Wide Compatibility: Printing temperature 240-270°C, platform 60-80°C, with ±0.03mm diameter accuracy. Compatible with most 1.75mm FDM printers for reliable, warp-free prints.
From the listing on Amazon.
View our other Vividcrate listings here.
View our other Nylon listings here.
Keep your filament dry, view our gear here.
Printing Vividcrate Nylon
Vividcrate Nylon in Black runs on the Nylon profile below, and this listing is a 1kg spool. Nylon is best suited to tough, wear-resistant mechanical parts like gears, hinges, and high-heat brackets. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusa and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our Nylon filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.