iBOSS 3D Printer Filament 1kg, Tricolor PLA+ Filament 1.75mm+/-0.02mm Silk Filament Red-Yellow-Blue, 3D Printing Accessories PLA Plus Filament Multicolor, Fit for Most 3D Printers
Compare all 68 iBOSS PLA+ Silk 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- ✨【Silk Tri-color PLA+ Filament】--- The Silk PLA PLUS combines three colors into a single filament, resulting in a unique multicolor effect in the printed object. The vibrant and contrasting colors create a striking visual impact, offering more creativity and aesthetic appeal from different viewing angles.
- 📏【Dimensional Accuracy & Consistency】--- iBOSS 3D Printer PLA+ filament of 1.75mm diameter, Minimum tolerance and low warping to ensure consistent feeding and stable prints.Dimensional accuracy + / - 0.02 mm ; 1 kg spool (2.2lbs), which making filament that have an outstanding surface finish and are highly precise.
- 🧵【Tangle Free & Bubble-Free & Clog-Free】--- Our 3D Printing Filaments are easy-to-use.Total Length: 340-350m.Recommended Print Temperature:220-230℃.Melt well, feed smoothly and constantly without clogging the nozzle or extruder.Full mechanical winding and strict manual examination,to make sure the line tidy and no-tangle.
- 📦【Vacuumed Sealed Packaging】--- Net Weight: 1KG. iBOSS PLA PRO filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
- 🛠️【Wide Compatibility and Color Selection】--- iBOSS filaments seamlessly integrates with most 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations.
From the listing on Amazon.
View our other iBOSS listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing iBOSS PLA Plus
iBOSS PLA Plus in Silk Blue runs on the PLA Plus profile below, and this listing is a 1kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.