IEMAI PA6-CF Filament 1.75mm, Carbon Fiber Nylon, Black, 1kg
Compare all 5 IEMAI Nylon-CF 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Carbon Fiber Reinforced PA6 Nylon: Carbon fiber reinforcement improves the rigidity, strength and dimensional stability of PA6 nylon. Designed for functional parts that need to withstand mechanical loads, repeated use and demanding working conditions.
- Heat Resistant Engineering Material: PA6-CF maintains reliable structural performance at elevated temperatures, making it suitable for motor housings, gears, brackets, jigs, fixtures, drone frames, automotive accessories and workshop components.
- High Rigidity and Low Deformation: The reinforced formulation helps reduce shrinkage and deformation while improving resistance to bending and long-term loads. Ideal for accurately fitted mechanical parts and load-bearing prototypes.
- Matte Finish and Reliable Layer Bonding: Carbon fiber creates a refined low-gloss texture that helps reduce visible layer lines. The balanced PA6 formulation supports strong layer adhesion and a clean technical appearance.
- Drying and Printing Recommendations: Dry at 80°C for approximately 12–24 hours before printing. Start with a 270–290°C nozzle, 50–70°C bed and 50–150mm/s speed. Use an enclosed printer and a 0.4mm or larger wear-resistant nozzle.
From the listing on Amazon.
View our other IEMAI listings here.
View our other Nylon-CF listings here.
Keep your filament dry, view our gear here.
Printing IEMAI Nylon-CF
IEMAI Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.