SHIMMERFIL PETG Filament 1.75mm, 1kg, Black | ±0.03mm, Ender 3/Prusa Compatible, Moisture-Proof, No Clogging/Stringing, High-Toughness
Compare all 5 SHIMMERFIL PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Precise Diameter Tolerance: PETG Filament 1.75mm 0.02mm ensures consistent extrusion without clogging, compatible with Ender 3 and Prusa printers, even beginners can avoid failed prints and works with most home 3D printers for DIY projects
- Moisture-Proof Vacuum Sealing: Each roll comes with desiccant packs in vacuum-sealed packaging, stays dry for 6 months and ready to use straight from the box without requiring a filament dryer
- High Toughness and Clean Printing: Features 25% elongation rate providing stronger durability than PLA, anti-stringing formula produces clean overhangs and functional parts like phone stands and gears that resist cracking when dropped
- Recommended Printing Parameters: Print at nozzle temperature of 240-260C, bed temperature of 50-70C, and printing speed of 30-200mm/s for optimal results with this PETG filament
- Wide Printer Compatibility: Works with 99% of home 3D printers including Ender 3/5, Prusa Mini/MK4, and Anycubic Kobra models, eliminating concerns about incorrect filament sizing
- 1kg Spool Capacity: Each spool contains 1 kilogram of black PETG filament, providing ample material for multiple projects and extended printing sessions with FDM 3D printers
From the listing on Amazon.
View our other SHIMMERFIL listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing SHIMMERFIL PETG
SHIMMERFIL PETG in Black runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.