SHIMMERFIL PETG Filament 1.75mm, 1kg, Transparent Red | ±0.03mm, Ender 3/Prusa Compatible, Moisture-Proof, No Clogging/Stringing, High-Toughness
Compare all 5 SHIMMERFIL PETG Transparent 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- PETG Filament 1.75mm 0.02mm: Ultra-precise sizing compatible with Ender 3 and Prusa printers helps beginners skip failed prints and eliminates clogging headaches, works with most home 3D printers for DIY projects
- Moisture-Proof Vacuum Sealing: Each roll comes with desiccant packs and stays dry for 6 months, eliminating bubbles from damp filament and allowing use straight from the box without requiring a dryer
- No Stringing and High Toughness: Features 25% elongation rate that is stronger than PLA with anti-stringing formula, produces clean phone stands and gears that resist cracking when dropped and eliminates messy overhangs
- Recommended Printing Settings Parameters: Print at nozzle temperature of 240-260C, bed temperature of 50-70C, and printing speed of 30-200mm/s for optimal results with this PETG filament
- 99% Home Printer Compatibility: Works with Ender 3/5, Prusa Mini/MK4, Anycubic Kobra and most home 3D printers, eliminating wrong filament size issues with consistent 1.75mm diameter
- Transparent Red Color Finish: Provides a vibrant transparent red appearance for your 3D printed projects including display pieces, functional parts, and decorative items
From the listing on Amazon.
View our other SHIMMERFIL listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing SHIMMERFIL PETG
SHIMMERFIL PETG in Transparent Red runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.