SHIMMERFIL PETG Filament 1.75mm, 1kg, White | ±0.03mm, Ender 3/Prusa Compatible, Moisture-Proof, No Clogging/Stringing, High-Toughness
Compare all 5 SHIMMERFIL PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- PETG Filament 1.75mm 0.02mm: Ultra-precise sizing compatible with Ender 3 and Prusa printers helps reduce clogging and failed prints, even for beginners. Works with most home 3D printers for DIY projects
- Moisture-Proof Vacuum Sealing: Each roll comes with desiccant packs in vacuum-sealed packaging to keep filament dry for up to 6 months, allowing use straight from the box without requiring a dryer
- No Stringing and High Toughness: Features 25% elongation rate providing stronger performance than PLA, with anti-stringing formula that produces clean prints on phone stands and gears that resist cracking when dropped
- Recommended Printing Settings Parameters: Nozzle temperature of 240-260C, bed temperature of 50-70C, and printing speed of 30-200mm/s for optimal PETG filament printing results
- Wide Home Printer Compatibility: Works with Ender 3/5, Prusa Mini/MK4, Anycubic Kobra, and most home 3D printers, eliminating concerns about incorrect filament sizing
- 1kg Spool White Color: Comes in a standard 1kg spool in white color, suitable for a variety of functional and decorative 3D printing applications including organizers, gears, and display pieces
From the listing on Amazon.
View our other SHIMMERFIL listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing SHIMMERFIL PETG
SHIMMERFIL PETG in White runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.