TINMORRY ABS-GF Glass Fiber 3D Printer Filament 1.75mm, 1 KG, Black | Glass Fiber Reinforced, High Strength, Impact Resistant, Heat Resistant, Functional Parts, Industrial Fixtures

Product Details

• 【 Tips】 1. Nozzle Temp: 250 - 280 ℃. Hotbed Temp: 90 - 100 ℃. Printing Speed: <300 mm/s 2. Please use wear-resistant steel nozzles ( 0.6 mm is recommended, 0.4mm Capable) instead of ordinary brass nozzles! 3. Dry before use for the highest print quality (65 °C, 8 h). Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant). 4. During printing, ABS-GF may emit mild fumes. Please ensure proper ventilation or use a ventilation system.
• 【Higher Rigidity & Enhanced Interlayer Adhesion】 Fiberglass-reinforced formula boosts flexural modulus up to 2983 MPa, higher than standard ABS. With improving interlayer strength, it delivers double load-bearing and anti-bending capacity, perfect for printing functional mechanical parts and load-bearing brackets.
• 【Heat Resistant & Low Warpage】 Boasts a heat deflection temperature (HDT) of 100℃, higher than regular ABS, ideal for components used in high-temperature environments like engine bays and electronic device heat dissipation areas. Exceptional dimensional stability prevents warping during printing complex geometric and assembly parts.
• 【Abrasion & Water Resistant for Longevity】Upgraded wear resistance keeps printed items scratch-free, while ultra-low water absorption rate ensures waterproof and moisture-proof performance. Suitable for daily-use products and outdoor accessories with prolonged service life.
• 【Wide Compatibility】 Works seamlessly with most enclosed FDM 3D printers on the market. Beginner-friendly for all skill levels. If you have questions while using TINMORRY filament, please contact us to obtain profiles or download it from GitHub.

From the listing on Amazon.

View our other TINMORRY listings here.

View our other ABS-GF listings here.

Keep your filament dry, view our gear here.

Printing TINMORRY ABS-GF

TINMORRY ABS-GF in Black is ABS filled with chopped glass fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain ABS, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for ABS-GF, which usually prints a little hotter than plain ABS. ABS-GF is best suited to stiff, heat-resistant parts with less warping than plain ABS. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab data. Heat resistance is the heat deflection temperature (HDT). Read our glass fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

Glass fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.

Based on Bambu Lab and Prusa guidance. More in our glass fiber filament guide and nozzle types guide.