Polymaker Fiberon PETG-ESD Filament 1.75mm, ESD-Safe, Black, 1kg

Product Details

• ESD-Safe PETG: Compounded with carbon nanotubes to help dissipate static charge, making it suitable for electronics housings, PCB assembly jigs, component trays, storage fixtures, and tools used around static-sensitive components.
• Designed for Controlled Static Dissipation: PETG-ESD is intended to reduce static buildup around sensitive electronics. Surface resistivity varies with nozzle temperature, print orientation, part design, and environmental conditions. Test finished parts before critical ESD use.
• Tough and Durable Performance: Combines electrostatic dissipation with the toughness of PETG for reusable jigs, fixtures, enclosures, trays, and functional parts used in electronics manufacturing, assembly, handling, and storage.
• Print at 250–290°C: Use a 70–80°C build plate with the cooling fan off. An all-metal hotend capable of at least 250°C is recommended. A heated chamber is not required. Printing speeds up to 500mm/s are possible after printer and flow calibration.
• Moisture and ESD Management: If the filament has absorbed moisture or shows stringing, bubbles, or an uneven surface, dry at 65°C for 3 hours. Keep printed parts clean and dry, and regularly verify surface resistance in critical ESD applications.

From the listing on Amazon.

View our other Polymaker listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing Polymaker PETG

Polymaker PETG in Black runs on the standard PETG profile below, and this listing is a 1.00kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Settings sourced from our PETG filament guide. Read it for bed adhesion, drying, troubleshooting, and material-specific tips.