For SUNLU 3D Printer Engineering Filament 1KG Nylon 12 Carbon Fiber (PA12-CF) Low Water Absorption 1.75MM High Temp Resistance 75℃
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- thanks for your understanding.
From the listing on Amazon.
View our other MFYIEAAL listings here.
View our other Nylon-CF listings here.
Keep your filament dry, view our gear here.
Printing MFYIEAAL Nylon-CF
MFYIEAAL Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.