IEMAI ABS-GF Glass Fiber 3D Printer Filament 1.75mm, Matte Black, 1kg

Product Details

• 1️⃣【20% Glass Fiber Reinforced ABS】IEMAI matte black ABS-GF filament is reinforced with 20% chopped glass fiber to enhance stiffness, mechanical strength, and dimensional stability. Ideal for functional parts, industrial tooling, mechanical components, fixtures, and electronic housings
• 2️⃣【Heat & Chemical Resistance】Our ABS glass fiber filament offers excellent heat and chemical resistance for long-term durability in demanding environments. Ideal for automotive parts, electronic housings, and components exposed to oils, greases, and many industrial chemicals
• 3️⃣【Reliable Printing Performance】Manufactured with a precise +/-0.03mm diameter tolerance, this 1.75mm glass ABS fiber filament delivers consistent extrusion and excellent layer adhesion with reduced warping and minimal shrinkage
• 4️⃣【Professional Matte Surface Finish】IEMAI glass fiber filament produces a premium matte appearance with minimal visible layer lines and low surface reflection. Ideal for engineering prototypes, industrial tooling, mechanical assemblies, and end-use functional parts
• 5️⃣【Wide Printer Compatibility】The industrial ABS 3D printer filament is compatible with Bambu Lab X1, P1, and A1 Series, Creality Ender and K1 Series, Anycubic Kobra Series, Elegoo Neptune Series, Prusa MK3/MK4, Flashforge, AnkerMake M5, and many more
• 6️⃣【Printing Tips & Settings】①Dry at 70°C for 5-8 hours; ②Use a 0.4–0.6 mm hardened steel or wear-resistant nozzle; ③Apply glue to the base plate and print in an enclosed chamber; ④Nozzle temp 250–280°C, build plate temp 90–100°C, printing speed≤100mm/s

From the listing on Amazon.

View our other IEMAI listings here.

View our other ABS-GF listings here.

Keep your filament dry, view our gear here.

Printing IEMAI ABS-GF

IEMAI ABS-GF in Matte Black is ABS filled with chopped glass fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain ABS, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for ABS-GF, which usually prints a little hotter than plain ABS. ABS-GF is best suited to stiff, heat-resistant parts with less warping than plain ABS. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab data. Heat resistance is the heat deflection temperature (HDT). Read our glass fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

Glass fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.

Based on Bambu Lab and Prusa guidance. More in our glass fiber filament guide and nozzle types guide.