ABS-GF - Red - Filament with spool - 1 kg
Compare every Bambu Lab ABS-GF listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
View our other Bambu Lab listings here.
View our other ABS-GF listings here.
Keep your filament dry, view our gear here.
Printing Bambu Lab ABS-GF
Bambu Lab ABS-GF in Red is ABS filled with chopped glass fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain ABS, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for ABS-GF, which usually prints a little hotter than plain ABS. ABS-GF is best suited to stiff, heat-resistant parts with less warping than plain ABS. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab data. Heat resistance is the heat deflection temperature (HDT). Read our glass fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Glass fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our glass fiber filament guide and nozzle types guide.