Polymaker Panchroma Celestial PLA Filament 1.75mm 1kg, Yellow | Soft pastel translucency with fine sparkle for figurines and decor; use a 0.4mm or larger nozzle.

Product Details

• CELESTIAL YELLOW LOOK: A soft yellow base with soft translucency and fine sparkle. Light brings out subtle highlights in decorative prints.
• IDEAL PRINTS: Suits fantasy figurines, display models, ornaments, and decorative vases where color and surface detail matter more than structural strength.
• FINISH EXPECTATIONS: Soft translucency adds depth rather than clear transparency. Lighting, wall thickness, and model shape change the visible effect.
• PRINTER FIT: One 1kg spool of 1.75mm PLA for FDM/FFF printers. Use a 0.4mm or larger nozzle; confirm spool fit in automated feeders.
• PRINT AND CARE: Start at 190-230°C nozzle, 25-60°C bed, fan on. Tune speed for your model; store dry after opening and dry at 55°C for 6h if needed.

From the listing on Amazon.

View our other Polymaker listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing Polymaker PLA

Polymaker PLA in Yellow runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.