TINMORRY Rapid PETG 3D Printer Filament 1.75 mm, 1 KG, Fluorescent Yellow | Up to 300 mm/s, Low Stringing, Smooth Feeding, Wide Compatibility, Beginner-friendly for Daily Prints and Functional Parts
Compare all 46 TINMORRY PETG 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Tips: 1. Dry before use for the highest print quality (65 °C, 8 h). Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant). 2. Nozzle temperature 230-260 °C, hotbed 75-90 °C. 3. To make sure the first layer has good adhesion, it is recommended to turn off the cooling fan from the 1st to the 3rd layer.
- High-Speed Printing: Support high-speed printing up to 300 mm/s, which is 3-5 times faster than other brands of PETG filaments. It's easy to obtain high-quality prints with a uniform surface even at high-speed printing.
- High toughness and good heat resistance: TINMORRY PETG-Eco 3D Printer Filament has the advantages of high toughness, low shrinkage, and superb layer bonding. It is more robust and durable than PLA for a wider range of applications.
- Less prone to tangling and clogging: With a diameter of 1.75±0.03mm, TINMORRY PETG-Eco filament is completely mechanically wound and strictly inspected manually to ensure clean winding and easy feeding. The new formula also significantly improves print quality by reducing nozzle clogging and clumping compared to other brands of PETG.
- Wide Compatibility: Compatible with most 1.75mm FDM 3D printers on the market. TINMORRY Rapid PETG-eco filament perfectly fits Bambu Lab /Creality K1, K2 / QIDI / FLASHFORGE Adventurer 5M / Prusa MK4 /ANYCUBIC Kobra / AnkerMake M5 FDM 3D printers etc. If you have any questions while using TINMORRY filament, please contact us to get filament profile or download from GitHub.
From the listing on Amazon.
View our other TINMORRY listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing TINMORRY PETG
TINMORRY PETG in Yellow runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.