TRONXY Rapid PETG Filament, 1.75mm Red, 1kg,Metallic Gloss
Compare every TRONXY PETG listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Metallic Red PETG Filament】This Metallic Blue PETG filament delivers a premium metallic luster while retaining the overall performance of standard PETG. It gives your 3D prints a metal-like surface finish without any metal particle fillers. No polishing required—ideal for decorative parts and creative projects where appearance matters
- 【Ultra High-Speed Printing 】Enhanced fluidity enables rapid melting and smooth extrusion at speeds up to 600mm/s. Print faster without compromising quality, and cut project time by up to 70% compared to standard PETG
- 【Excellent Toughness + Easy to Use】Combines PLA’s low warp & odorless printing with ABS’s high strength, impact resistance, and heat resistance. Ideal for functional parts that need to withstand stress, bumps, and everyday use
- 【Recommended Print Settings】1.75mm diameter, tolerance ±0.03mm, 1kg net weight. Print temp: 235–265°C, bed temp: 70–85°C, speed: 30–600mm/s (optimal 200mm/s). Works flawlessly on both standard and high‑speed 3D printers
- 【Excellent Performance 】Specially designed and manufactured without clogging, keep a smooth and stable printing experience; Easy to handle, low warpage, reduce the risk of filaments jams
- 【Less-tangle】 Mechanical winding, manual secondary inspection, three inspections before shipment, ensure PETG 3D printer filament is tangle free, easy filament feeding operation
From the listing on Amazon.
View our other TRONXY listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing TRONXY PETG
TRONXY PETG in Red runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.