INLAND Micro Center PLA+ 3D Printing Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) (2 Pack White & True Red, 1.75mm)
Compare all 4 INLAND PLA+ Multicolor Pack 2kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- PLA Plus Filament Specs: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- PLA PRO Filament Printer Settings: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 45°C - 60°C (113°F - 122°F) Cardboard Spool Diameter: 8.81 in. (223.77 mm) - Cardboard Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
- Inland PLA + Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
- Easy-To-Use: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM and 2.85MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
- High-Quality PLA+: PLA+ filament is non-toxic, environment-friendly, and comes evenly wound on a cardboard spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence.
From the listing on Amazon.
View our other INLAND listings here.
View our other PLA Plus listings here.
Keep your filament dry, view our gear here.
Printing INLAND PLA Plus
INLAND PLA Plus in Red runs on the PLA Plus profile below, and this listing is a 2kg spool. PLA Plus is best suited to everyday parts that need a little more toughness than standard PLA, with the same heat limits. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against eSUN and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA variants guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.