JUSTMAKER PLA Matte 3D Printer Filament, Upgrade Cardboard Spool, Print with Most 3D Printers, Dimensional Accuracy +/-0.03mm, 1.75mm, 1kg, Cherry Red

Product Details

• MATTE SURFACE - Using a special process to make the filament present a matte texture, the printed surface of the print is both matte and flat, and will not produce obvious layer lines
• GREAT DUCTILITY - The toughness of the material has been enhanced, and the impact strength has been increased by about 50% compared with that of the basic PLA, so that it is not easy to break in the process of use
• FILAMENT SPECIFICATION - The printing temperature is 210-230°C, the platform temperature is 30-60°Cand the printing speed is 40-80 mm/s
• GOOD COMPATIBILITY - Match most of the common printer models on the market, including the bambu lab
• GREEN - No toxic and harmful gases are produced after full combustion
• UPGRADED CARDBOARD DESIGN - The spools are newly upgraded to cardboard for better handling of recycling and designed with storage holes for easy storage
• HIGH PRECISION WIRE DIAMETER CONTROL - Advanced diameter control and defect detection technology are used for no bump defects
• EASY TO PRINT AND NEATLY ARRANGE - It is easy for novice users to get started with basic settings. Guarantee a smooth and stable printing experience
• HIGH PRINTABILITY - Significantly improves sticky nozzle problems and makes printing easier
• SUITABLE FOR DECORATIVE PRINTING JUSTMAKER - Matte material presents a wider variety of choices for color expression and more detailed printing effects, suitable for printing high-grade, brightly colored models

From the listing on Amazon.

View our other JUSTMAKER listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing JUSTMAKER PLA

JUSTMAKER PLA in Matte Red runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.