R QIDI TECHNOLOGY PAHT-CF Carbon Fiber Nylon Filament 1.75mm,1Kg Spool
Compare every R QIDI TECHNOLOGY Nylon-CF listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Excellent Mechanical Properties】 85% High temp Nylon Coupled with 15% Carbon Fiber.Higher Strength and Rigidity. Excellent Toughness. Outstanding resistance to Impact, Wear, Chemical and High temperatureand .
- 【High Dimensional Stability】PAHT-CF is an enhanced composite carbon fiber high temp nylon material, adding 15% carbon fiber, this carefully formulated blend ensures ease of stable prints, extremely high successful rate, outstanding surface finish and good layer adhesion with no warping and less shrinkage.
- 【Low Moisture Sensity】PAHT-CF's saturated moisture absorption rate is only one tenth of that of ordinary PA6.Its low moisture sensitivity ensures outstanding mechanical and thermal properties even after the moisture conditioning process.
- 【Tangle Free & Vacuum Aluminum Foil Package】QiDi PAHT-CF 1KG filament 1.75mm is carefully winded to avoid any tangling issues. And we used vacuum aluminum foil packaging, its water vapor transmission rate is only 0.014%. You can open it for use without drying.
- 【Printing Tips】Hardened steel and above grade nozzles are highly recommended for printing this filament. Print Temp: 300°C - 320°C, Bed Temp: 70°C - 80°C, Fan Speed: 0%, Print Speed:60-160mm/s. Annealing: 80-100℃ for 4 to 8 hours （For further improve the strength of print part）
From the listing on Amazon.
View our other R QIDI TECHNOLOGY listings here.
View our other Nylon-CF listings here.
Keep your filament dry, view our gear here.
Printing R QIDI TECHNOLOGY Nylon-CF
R QIDI TECHNOLOGY Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.