Kingroon PETG 3D Printer Filament, 10 Rolls, Dimensional Accuracy +/- 0.03 mm, 10kg Spool(22lbs), 1.75 mm, Gray

Product Details

• Transparency and stability:The surface of the finished product has good gloss, the lines are delicate and translucent, it is not easy to absorb moisture, the stability is good, and it is hard to produce cracks.
• Strong impact resistance: With outstanding toughness and high resistance, PETG combines the good mechanical properties of ABS with high toughness. At the same time, it has good printing performance that PLA is easy to use and not easy to warp.
• Odorless and degradable: Food grade raw materials, non-toxic, odorless, and degradable.
• No edge warping, fluidity and smooth discharge: High-precision printing, high translucency, no edge warping, no clogs, no bubbles.
• PETG Filament Setting Recommendations: Printing temperature 210-230°C (230°C recommended), Build plate temperature 65-80°C,Printing speed 40-80mm/s.

From the listing on Amazon.

View our other Kingroon listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing Kingroon PETG

Kingroon PETG in Grey runs on the PETG profile below, and this listing is a 10kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.