SpiderMaker PA-CF Nylon 3D Printer Filament, Carbon Fiber Filled Nylon Filament - 1.75mm, 500g (Black)
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- HIGH HEAT RESISTANT - SpiderMaker PA-CF has outstanding high heat resistance, and can be used in high temperature environments. The heat deflection temperature is closed to 150°C.
- SMOOTH PRINTING - SpiderMaker PA-CF Nylon filament is made of an upgrade formula 80% low-melting-point nylon base with 20% carbon fiber. Compared to PA6 base carbon fiber filament, SpiderMaker PA-CF filament can be printed with lower printing temperature, ensuring ease of stable prints.
- STRONG STRENGTH - The PA-CF provides incredible toughness and rigidity, which can be used in applications requiring torsional, tensile, and impact strength parts.
- GREAT SURFACE AND LIGHT WEIGHT - The PA-CF prints are provided with great matte finish surface and light weight. It’s low density, the weight is much lighter than steel and aluminum alloy, which accomplish the balance of retaining the strength and keeping light-weight.
- TIPS FOR PRINTING - As an abrasive material, the SpiderMaker PA-CF filament may wear out and clog stock 0.4mm brass nozzles rapidly, hardened steel or ruby nozzles are highly recommended for printing this filament. For better layer adhesion and finish, we would also suggest drying it before printing, also turning down the cooling fan under 30% while printing.
- Suggested Printing Temp: 240°C - 260°C, Suggested Bed Temp: 50°C, Suggested Fan Speed: under 30%, Suggested Printing Speed: 30-60mm/s. For the best results, please dry the PA-CF filament with 60°C for 6-8 hours before use.
From the listing on Amazon.
View our other SPIDER MAKER listings here.
View our other Nylon-CF listings here.
Keep your filament dry, view our gear here.
Printing SPIDER MAKER Nylon-CF
SPIDER MAKER Nylon-CF in Black is Nylon filled with chopped carbon fiber, and this listing is a 0.5kg spool. The fibers make parts stiffer and more dimensionally stable than plain Nylon, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for Nylon-CF, which usually prints a little hotter than plain Nylon. Nylon-CF is best suited to strong, stiff engineering parts that must also tolerate heat. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Polymaker and Prusament data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.