Polymaker 3D Printing Filament CosPLA 1.75mm, 1kg, Version B

Product Details

• COSPLAY PLA FILAMENT: Version A is designed for helmets, masks and detailed costume props. It emphasizes sanding and painting during post-processing; Version B places more emphasis on durability.
• SMOOTHER FINISHING: Sand printed surfaces to prepare them for primer and paint. Test finishing materials on a small sample first; results depend on print settings and finishing methods.
• DESIGNED FOR PROP MAKERS: Make display pieces, armor details and costume accessories that need shaping and surface work. Plan wall thickness, print orientation and joints for intended use.
• TDS PRINT SETTINGS: For a 0.4mm nozzle, start within 190-230°C nozzle, 25-60°C bed and 50-300mm/s speed. Use the part-cooling fan; adjust settings after a small test print.
• COSPLAY 3D PRINTING FILAMENT: Grey-tone 1.75mm filament, 1kg net. An enclosed chamber is not needed. Store dry and, if needed, follow the TDS drying recommendation of 55°C for 6 hours.

From the listing on Amazon.

View our other Polymaker listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing Polymaker PLA

Polymaker PLA in Grey runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.