Bambu Lab PETG Matte 3D Printer Filament 1.75 mm 1 kg RFID | Pink on spool, matte finish, prints like PLA, less stringing
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Matte finish without plastic shine: velvety matte surface conceals layer lines and gives decorations, vases, lamps and organisers a high-quality look, 8 colours from pastel to lime
- Prints like PLA: Revised formula against stringing, blobs and blockages, clean bridges and overhangs, supports can be removed by hand and leave smooth surfaces
- Less moisture problems: improved resistance to humidity, water absorption only 0.29%, drying only required after over 72 hours at more than 50% humidity
- Robust and heat resistant: tensile strength 42.9 MPa, bending strength 65 MPa, impact resistance 32.6 kJ/m², heat resistance 72 °C, nozzle 230 to 260 °C, pressure bed 65 to 75 °C, up to 250 mm/s
- RFID and AMS compatible: printing parameters in RFID tag, for AMS, AMS 2 Pro, AMS HT and AMS Lite, low emission according to UL 2904 GREENGUARD, 1.75 mm +/- 0.03 mm, 1 kg, with coil or as a refill
From the listing on Amazon.
View our other Bambu Lab listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing Bambu Lab PETG
Bambu Lab PETG in Matte Pink runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.