iSANMATE PETG Matte Green 1kg

iSANMATE

iSANMATE Upgrade Matte PETG Army Green Filament 1.75mm 30-300mm/s 1KG | Optimized for Bambu Lab Smooth Matte surface Easy to Print 3D Printer Filament Dimensional Accuracy +/- 0.02mm

PETG Matte Green 1kg

Compare all 10 iSANMATE PETG Matte 1kg listings →

Total Size
1KG
Color(s)
Price / kg
$15.99/kg
Total
$15.99

Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.

Product Details

  • 【Upgraded Matte PETG】 This premium 3D printer filament offers a low gloss finish that makes layer lines nearly invisible. The new formula allows easy support removal, leaving flat, clean surfaces. As easy to use as basic PLA for beginners
  • 【Print Settings】 Dry this PETG Filament at 60°C for 5-8 hours before printing. Bambu Lab users: use the PETG Matte profile. Other FDM printers: nozzle 230-270°C, bed 60-80°C, speed 30-300mm/s
  • 【Note】 Dry the 3D Printing Filament before printing for best results. PETG bonds strongly to PEI plates—wait for the build plate to cool before removing models to avoid damaging the surface. Matte PETG is not recommended as support material for PLA; use regular PETG instead
  • 【Developed for Bambu Lab 3D Printers】 Specially developed for Bambu Lab. After countless tests,our Army Green filament achieves perfect results with the "PETG Matte" profile—no extra presets needed. For other 3D printers, the "Generic PETG" profile also works well
  • 【Fit Most FDM 3D Printers 】Standard Spool Sizes,Fit 99% FDM 3D Printers,Filament Dryer Box and Holder,AMS & AMS Lite,3d pen!including Bambu Lab A1,P1,X1 series, Creality Ender and K1 series,Anycubic Kobra series,FlashForge Adventurer series,and more

From the listing on Amazon.

View our other iSANMATE listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing iSANMATE PETG

iSANMATE PETG in Matte Green runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Nozzle temp
230-260°C
Bed
70-90°C
Enclosure
Optional
Drying
60-65°C, 6-8h
Heat resistance
~70°C
Cooling fan
20-60%
Difficulty
Easy

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Nozzle type
Brass or hardened steel
0.2 mm
Can use
Fine detail, slow.
0.4 mm
Can use
The standard size.
0.6 mm
Can use
Faster, stronger walls.
0.8 mm
Can use
Large, fast parts.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.

The week's lowest prices, every Thursday.

One email a week: our best buy (a spool at its lowest price ever), the cheapest price per kg for each major material and how it moved, and the lowest 1kg and bulk deals. Free, unsubscribe anytime.

✓ Best buy of the week ✓ Floor price per material ✓ One email a week
See what's in each issue