Superfila Bamboo Original PETG Matte Refill Filament 1.75MM, Lime 35500 | Without spool, Soft matte finish, Easy print 3D Printer Filament with RFID for Bambu Lab A/X/P/H series,AMS, 1 KG +/- 0.03 mm
Compare every Superfila PETG listing →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Differences from PETG Basic】Bmaboo PETG Basic inherently possesses a matte finish, but the new matte PETG has undergone a specially optimized formula, further reducing surface gloss and significantly improving support for removal and string control, making it more suitable for users with high demands for surface texture. For users seeking the ultimate aesthetic and minimizing post-processing time, this consumable is a superior choice compared to the standard version.
- 【High Quality】Bamboo PETG Matte boasts ease of use comparable to Bamboo PLA Basic, producing crisp and delicate print details. It greatly reduces the problems of stringing and nozzle sticking associated with traditional PETG prints, and maintains consistent, stable, and smooth printing even over extended periods.
- 【RFID for Smart Printing】Simplify your workflow with RFID-enabled filament. All printing parameters are integrated into the spool's RFID chip and are automatically read by the automatic material management system (AMS). Simply insert and print – complicated settings are a thing of the past.
- 【Easy to Print】To make the supports easier to remove, a formula specially developed for matte PETG is used. Whether it is a complex overhang or a tiny hole, the support structure can be peeled off by hand. This ensures the model's strength while leaving a smooth, clean contact surface.
- 【Printing Tips】Allow to dry before use for optimal print quality and consistent results. Drying conditions: In a drying cabinet: 60-65°C for 8 hours; X/P Series and H2 Series Printer Heated Beds: 80°C, 12h; AMS 2 Pro & AMS HT: 65°C, 8h; Printing nozzle temperature: 230-260℃.
From the listing on Amazon.
View our other Superfila listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing Superfila PETG
Superfila PETG in Matte Green runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.