SUNLU PP2.0 Filament, Polypropylene 3D Printer Filament, Natural White | Upgraded PP Filament 1.75mm, 170mm/s High-Speed Printing, Low Warping, 70°C HDT & Ultra-Tough PP2.0+/-0.03mm, 800g/Spool
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- ①【Up to 170mm/s】SUNLU PP2.0 filament supports printing speed up to 170 mm/s, while PP reaches 150 mm/s. Far faster than ordinary filaments at 60 mm/s, greatly boost your output efficiency while maintaining smooth surface finish.
- ②【Stable, Low‑Warp Printing】Optimized from standard PP, SUNLU PP2.0 features a refined formulation that not only reduces warpage and improves bed adhesion for flat, reliable prints, but also results in a lightweight, low-density material. This reduces finished part weight while maintaining mechanical strength.
- ③【Heat Resistance Upgraded】PP2.0 filament features a 70°C heat deflection temperature, 14.8% higher than standard PP at 61°C. It delivers superior dimensional stability under heat, perfect for functional parts in automotive interior applications
- ④【High Toughness】SUNLU PP2.0 Filament exhibits an elongation at break of up to 900%. It withstands repeated stress, bending and impact. This material is ideal for printing functional components requiring long-term durability, such as active hinges, snap-fit fasteners and tool handles.
- ⑤【Recommended Settings】We recommend printing with the following parameters: Nozzle Temperature: 210-230°C, Print Speed: 30-170mm/s, and Bed Temperature: 50-60°C. Also dry 2–4h at 50–80°C, use PP glue, 10% fan, and enclose to reduce warping and get smooth finish.
- ⑥【Chemical Resistance】Polypropylene filament exhibits exceptional resistance to corrosion from various chemical solvents, remaining unaffected by damage, deformation, or melting in environments containing strong acids and alkalis (pH 0.5–14). This ensures printed components maintain structural integrity and dimensional stability even when exposed to corrosive substances.
- ⑦【Fatigue Resistance】PP2.0 filament can withstand repeated cyclic stresses and loads without developing fatigue cracks, exhibiting excellent fatigue resistance. This makes it an ideal material for applications requiring durable performance or components subjected to repeated stress cycles.
- ⑧【1.75mm Diameter】- Dimensional Accuracy +/- 0.03mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for most 1.75mm FDM 3D printers.
- ⑨【Strong Compatibility】Spool Diameter: 200mm(7.87"), Spool Width:67mm(2.63"), Spool Hub Hole Diameter: 55mm(2.16"). Compatible with most printers, such as Bambulab H2D, X1 series, etc.
- ⑩【Vacuum Packed】-SUNLU 3D printer filaments are all vacuum sealed and come with a desiccant pack. Vacuum packing, dustproof and protect the filament dry, avoid absorbing moisture during transportation. Guaranteed to deliver the best printing effect of the filament to the hands of customers.
From the listing on Amazon.
View our other SUNLU listings here.
View our other PP listings here.
Keep your filament dry, view our gear here.
Printing SUNLU PP
SUNLU PP in White runs on the PP profile below, and this listing is a 0.8kg spool. PP is best suited to living hinges, snap fits and parts that must resist chemicals. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Prusa and Fiberlogy data. Heat resistance is the heat deflection temperature (HDT). Read our PP filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Prusa guidance. More in our nozzle types guide.