MarsWork Dual Color Silk PLA Bundle for Bambu Lab 3D Printers, 4 x 250g | Pre-Dried Beginner Friendly Multi Color Changing 3D Printing Filament 1.75mm, 4-Pack, Pre-tuned for Bambu Lab PLA Silk
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- AMS READY WITH ADAPTER — Search “MarsWork 250g Spool Adapter” on MakerWorld, print and install it, then your 250g mini spools are ready for Bambu AMS.
- PRE-TUNED FOR BAMBU — Specially optimized for the Bambu Lab PLA Silk preset—delivering high-success prints right out of the box, even for beginners.
- DYNAMIC DUAL-COLOR EFFECT— Two seamlessly blended colors reveal a different look as you turn the model, adding rich silk shine and eye-catching dimension to every print. Ideal for figurines, decorative models, and display pieces.
- TRIPLE-DRIED, PRINT-READY — Your PLA Silk is triple-dried and sealed with desiccant, arriving under 0.3% moisture. Open the bag and start printing instantly.For best results, further drying before printing is recommended.
- TESTED FOR PEACE OF MIND — Meets applicable EU food-contact migration limits, ASTM F963-23 limits for specified elements, and applicable limits for regulated phthalates. VOC emissions were not detected in ISO 16000 testing.
- 4 COLORS IN ONE BUNDLE—Explore four distinct colors for fresh combinations, colorful accents, and discovering the shades you’ll want for future prints.
- LESS LEFTOVER FILAMENT — Ideal for small parts, one-off projects, and everyday printing needs, helping reduce leftover material so smaller projects don’t call for extra full 1kg rolls.
- CHECK 250G MINI SPOOL SIZE — Spool Diameter: 138 mm (5.43 inches), Spool Width: 35 mm (1.37 inches), Spool Center Hub Hole Diameter: 55 mm (2.16 inches)
From the listing on Amazon.
View our other MarsWork listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing MarsWork PLA
MarsWork PLA in Multicolor runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.