ELEGOO PLA Filament Sunflower Yellow 1KG &PETG-CF Filament Green 1KG
Compare all 16 ELEGOO PETG-CF 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Superior Compatibility：ELEGOO PLA Basic filaments are fully compatible with reusable spools of ELEGOO, Bambu Lab, eSun and more. You can also print your own spool for seamless use with most 3D printers.
- Eco-Friendly Refill Design：ELEGOO PLA Basic Refill offers a more sustainable alternative to traditional spooled filament, cuts extra plastic waste and lowers carbon footprint, to support high quality printing with less environmental impact.
- Stable Print Experience For All Users：Made of pure premium PLA, it has low melting temperature, low warping and strong layer adhesion, with 1.75mm ±0.02mm diameter, neat winding and full pre-drying, to reduce tangles, clogging, bubbles and print defects for both beginners and professionals.
- Superior Mechanical Performance：ELEGOO PETG-CF filament is made of PETG and carbon fibers, featuring high strength, exceptional impact resistance, abrasion resistance and dimensional accuracy, less prone to fracture, perfect for functional parts, gears, bearings and outdoor items.
- Wide Compatibility & Delicate Finish：This PETG-CF filament works with most common 1.75mm FDM 3D printers, brings distinct fine matte texture that reduces visible layer lines. It is recommended to use 0.4mm or above hardened steel nozzle at 240-270C and 65-75C hotbed.
From the listing on Amazon.
View our other ELEGOO listings here.
View our other PETG-CF listings here.
Keep your filament dry, view our gear here.
Printing ELEGOO PETG-CF
ELEGOO PETG-CF in Green is PETG filled with chopped carbon fiber, and this listing is a 1kg spool. The fibers make parts stiffer and more dimensionally stable than plain PETG, but they are abrasive, so a hardened nozzle is mandatory (see nozzle compatibility below). The ranges below are for PETG-CF, which usually prints a little hotter than plain PETG. PETG-CF is best suited to stiff functional parts such as jigs, fixtures and brackets that need PETG's chemical resistance. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our carbon fiber filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
Carbon fiber is abrasive and wears brass (and stainless) nozzles out of round, sometimes within a single spool. Use hardened steel or another wear resistant nozzle such as ruby or tungsten carbide. With hardened steel, start about 5 to 10°C hotter than you would with brass.
Based on Bambu Lab and Prusa guidance. More in our carbon fiber filament guide and nozzle types guide.