Inslogic Pre-Dried PETG 2.0 Filament 1.75mm, 8×0.25kg, 8 Colors
Compare all 2 Inslogic PETG Multicolor Pack 2kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- 【Low Moisture Absorption】Less moisture absorption than standard PETG, with less stringing even after 5–10 days or longer left out.
- 【Stable Printing】Prints smoothly with fewer blobs, gaps and surface defects, helping produce cleaner results across everyday models.
- 【Precise Dimensions】Low shrinkage helps maintain dimensional consistency, making PETG 2.0 suitable for functional parts, prototypes and fit testing.
- 【Strong Layer Adhesion】 Strong interlayer bonding supports cohesive printed parts for prototypes, functional components, molds and end-use applications.
- 【Higher Impact Strength】 6 kJ/m² impact strength, higher than standard PETG, for greater load-bearing capacity in sturdy household parts and everyday tools.
- 【1.75mm PETG Filament】1.75 ± 0.02 mm; pre-dried 3–6 hours and vacuum sealed for moisture protection. Ready to print with 1.75 mm FDM 3D printers.
- 【8 Vibrant Colors】 Includes Green, Red, Klein Blue, Sunshine Orange, Coffee Brown, Cyan, Bone White and Yellow for colorful prints and creative projects.
- 【Quarter-kilo Spools】 Includes 8 x 0.25 kg spools, giving you 2 kg total filament with multiple colors for multicolor projects and less material waste.
- 【Flexible Print Settings】230–270°C nozzle, 50–200 mm/s, 0.2–0.6 mm nozzles. Use 60–70°C bed for standard prints and 90°C for large PETG 2.0 models to reduce warping.
- 【After-Sales Support】Inslogic provides comprehensive after-sales service and expert technical support. Contact us anytime with any questions.
From the listing on Amazon.
View our other Inslogic listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing Inslogic PETG
Inslogic PETG in Multicolor runs on the PETG profile below, and this listing is a 2kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.