Tiayoh Amber PETG Filament, Transparent, Translucent, ±0.02mm, 500g, 1.1lbs | Tough, Heat Resistant, Clog-Free, Tangle-Free, No Odor, Water Resistant, FDM, 1.75mm, Vacuum Sealed, Durable, Outdoor, Easy
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- Amber PETG:Warm Glow, Real Toughness-Warm, tinted-glass translucency-tough Amber PETG with ~75°C heat resistance. Great for lampshades, light fixtures, home decor, plant pots, and display accents. Slower prints bring out a deeper glow.
- Prints Like a Pro, Right Away:Nozzle 230-250°C, bed 70-80°C. Good layer adhesion, clean flow. Popping and stringing drop sharply when dry. Dry 4h at 55°C first. Works on most FDM printers.
- 500g-Right Between Sampler and Full Roll:More filament than 200g samplers, less commitment than a 1kg spool.Enough for several real projects-try the material, dial in your settings, and decide if PETG is your go-to without leftover waste.
- ±0.02mm Out of the Box:Consistent 1.75mm diameter for even extrusion and smooth layers. Engineered to reduce jams and bubbles-a key quality metric reviewers compare across brands.
- Vacuum Sealed, Neatly Wound:Vacuum packed with desiccant to block moisture before first use. Neat winding helps prevent snags mid-print. Open, dry, and print-let sit too long, use a dryer box to restore its clean look.
From the listing on Amazon.
View our other Tiayoh listings here.
View our other PETG listings here.
Keep your filament dry, view our gear here.
Printing Tiayoh PETG
Tiayoh PETG in Transparent runs on the PETG profile below, and this listing is a 0.5kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.