Estink PLA Filament 1.75mm Multicolor Gradient 3D Printer Filament, Plant Based Printing Material, 1kg Spool, ±0.02mm Diameter, 374 to 428°F, for Toys Crafts Decorations (Silky Macaron Color)

Product Details

• [Gradient Color Effect]PLA filament delivers a multicolor gradient finish with smooth color shift through each print. Great for toys decorations figures and craft that need added visual detail.
• [Stable 1.75mm Diameter]3D printer filament features approx 1.75mm diameter with ±0.02mm tolerance for steady feeding and consistent extrusion. Supports 0.1 to 0.3mm layer height printing.
• [Printing Range]Recommended nozzle temperature is 374 to 428°F with heated bed 32 to 140°F. Suggested print speed is 40 to 60mm per second for balanced and clean layer output.
• [PLA Material Data]Made of plant based PLA with tensile strength 45Mpa flexural modulus 3500Mpa elongation at break 5 percent density 1.25g per cm³ and melt flowrate 3 to 6g per 10min.
• [Creative Everyday Use]Net filament weight is approx 1kg and total weight is approx 1350g. Suitable for hobby users beginners and makers creating ornaments handcrafts display pieces and decorative prints.

From the listing on Amazon.

View our other Estink listings here.

View our other PLA listings here.

Keep your filament dry, view our gear here.

Printing Estink PLA

Estink PLA in Silk Rainbow runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.