MarsWork Candy Green Silk PLA, Pre-Dried Filament with Reusable Spool | Christmas 1.75mm 3D Printing Filament 1kg (2.2lbs), Compatible with Bambu Lab 3D Printers
Compare all 35 MarsWork PLA Silk 1kg listings →
Is this a good price? Every Thursday we email the cheapest price per kg for each major material, plus our best buy of the week.
Product Details
- TESTED FOR PEACE OF MIND — Meets applicable EU food-contact migration limits, ASTM F963-23 limits for specified elements, and applicable limits for regulated phthalates. VOC emissions were not detected in ISO 16000 testing.
- QUICK-SWAP SPOOL — Press, lift, and swap filaments in seconds. Strap half-used rolls to store neatly and reuse the same spool for your next color, keeping your workspace truly organized.
- PRE-TUNED FOR BAMBU — Specially optimized for the Bambu Lab PLA Silk preset—delivering high-success prints right out of the box, even for beginners.
- TRIPLE-DRIED, PRINT-READY — Your PLA Silk is triple-dried and sealed with desiccant, arriving under 0.3% moisture. Open the bag and start printing instantly.For best results, further drying before printing is recommended.
- CHROME-LIKE SILK SHINE — Creates a smooth, high-gloss metallic finish that gives printed models a clean, refined look straight off the printer—no polishing needed. For the best gloss, lowering the outer wall speed to 50 mm/s is recommended.
From the listing on Amazon.
View our other MarsWork listings here.
View our other PLA listings here.
Keep your filament dry, view our gear here.
Printing MarsWork PLA
MarsWork PLA in Silk Green runs on the PLA profile below, and this listing is a 1kg spool. PLA is best suited to everyday prototypes, models, and indoor parts that won't face heat or heavy stress. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.
Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PLA filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.
Nozzle Compatibility
This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.
Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.