Creality Refill PETG Filament 1kg(2.2lbs) 3D Printer Filament:Refilament 1.75mm PETG Filament, for Bambu Lab Reusable Spools, Dimensional Accuracy ±0.03mm, Transparent Blue

Product Details

• Strength &Flexibility - - Creality PETG filament offers a balance of properties from both PLA and ABS materials. It features low shrinkage, good impact resistance, and temperature durability. The material maintains flexibility under stress, allowing for repeated bending
• Hubless Design for Bambu Lab & Compatible Spools - - Creality filament refill is engineered for seamless use for the Bambu Lab reusable spool system. It is also compatible with Marswork metal spools and the upcoming detachable spool from Creality. The universal hubless design helps reduce plastic waste by minimizing the need for single-use spools
• Reliable Layer Adhesion for Stability - - Formulated for consistent layer bonding, PETG filament helps minimize warping during the printing process. It contributes to smoother surface finishes and maintains structural integrity for reliable, durable prints
• Ready-to-Print with Reduced Clogging Risk -- 1.75 mm PETG Filament is thoroughly dried and vacuum-sealed before packaging to limit moisture absorption and preserve print quality. With a heat resistance of up to 80°C (176°F) and enhanced toughness compared to regular PLA, it is designed for cleaner extrusion with a reduced risk of nozzle clogs or bubbles when used promptly after opening
• Optimized Printing Parameters for Consistent Results - For reliable results, printing temperature between 220-250°C and substrate temperature of 70-80°C are recommended. PETG is known for its durability, good clarity, and surface finish, providing a reliable printing experience when used within the suggested settings

From the listing on Amazon.

View our other Creality listings here.

View our other PETG listings here.

Keep your filament dry, view our gear here.

Printing Creality PETG

Creality PETG in Transparent Blue runs on the PETG profile below, and this listing is a 1kg spool. PETG is best suited to functional parts that need toughness and the light outdoor or higher-heat use PLA can't handle. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our PETG filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.