Inslogic Pre-Dried PC-ABS Filament 1.75mm, Heat Resistant, Black, 1kg

Product Details

• HEAT RESISTANCE UP TO 103°C HDT: Designed for functional parts exposed to elevated temperatures, Inslogic PC-ABS offers a heat deflection temperature (HDT) of 103°C at 0.45 MPa. Its heat resistance makes it suitable for electronics housings, adapters, automotive accessories, and other applications where thermal stability matters. Actual service temperature depends on load, part geometry, and operating conditions.
• EXCELLENT IMPACT RESISTANCE: With a notched Izod impact strength of 70 kJ/m², PC-ABS is designed to withstand impact and mechanical stress in demanding applications. Use it for durable prototypes, accessory mounts, handles, hooks, and other functional components that need impact resistance.
• STRENGTH FOR FUNCTIONAL PARTS: Inslogic PC-ABS combines the heat resistance of polycarbonate (PC) with the flexural strength and processability of ABS. With a tensile strength of 42 MPa and flexural strength of 72 MPa, it is suitable for functional mechanical parts, durable prototypes, tooling, and practical end-use components.
• BUILT FOR ENGINEERING APPLICATIONS: Move beyond decorative prints with a material designed for functional prototyping and practical components. Applications include electronics enclosures, charger adapters, industrial panels, automotive accessory mounts, handles, hooks, and gears. Select the material according to the mechanical, thermal, and environmental demands of the finished part.
• PRECISE 1.75MM FILAMENT: Manufactured with a diameter tolerance of ±0.03mm, Inslogic PC-ABS supports consistent filament feeding and dimensional control when used with a properly calibrated FDM 3D printer. For fit-testing models and functional assemblies, results also depend on printer calibration, slicer settings, and part design.
• FINE DETAIL & QUALITY SURFACE FINISH: PC-ABS supports fine details and a quality surface finish, helping create functional prototypes and finished-looking components. It is suitable for housings, panels, adapters, and other parts where appearance matters alongside mechanical performance. The final surface quality depends on nozzle selection, print settings, and model geometry.
• ENGINEERING PERFORMANCE WITH PRACTICAL PRINTABILITY: PC-ABS is designed to be easier to print than many industrial-grade materials while retaining useful heat resistance and impact performance. For best results, follow the recommended high-temperature setup and ensure your printer can maintain the required nozzle and bed temperatures.
• PRE-DRIED & VACUUM-SEALED PROTECTION: Vacuum-sealed packaging helps protect the filament from moisture during storage. For moisture-sensitive material, follow the TDS drying guidance before printing: 70°C for 12 hours or 80°C for 6 hours. Keep unused filament sealed after opening to help maintain its condition.
• FDM PRINTER COMPATIBILITY & SPOOL OPTIONS: Designed for compatible FDM 3D printers that support 1.75mm engineering filament and high-temperature printing. Before use, verify that your printer can reach the recommended nozzle and bed temperatures. For reusable spool or automatic material system setups, confirm spool dimensions and feeding compatibility with the specific device.
• RECOMMENDED PRINT SETTINGS: Print at a nozzle temperature of 260–280°C and a bed temperature of 100–110°C, with the cooling fan turned off. Recommended nozzle sizes are 0.4mm and 0.6mm, and the supported print speed range is 50–230mm/s. Use a textured PEI sheet as recommended by the TDS. Dry the filament at 70°C for 12 hours or 80°C for 6 hours when needed, and ensure your printer and build surface are suitable for high-temperature PC-ABS printing.

From the listing on Amazon.

View our other Inslogic listings here.

View our other PC-ABS listings here.

Keep your filament dry, view our gear here.

Printing Inslogic PC-ABS

Inslogic PC-ABS in Black runs on the PC-ABS profile below, and this listing is a 1kg spool. PC-ABS is best suited to high-strength, heat-resistant engineering parts; PC-ABS/PC-GF/PC-CF blends print easier than pure PC at some cost to peak performance. Brands and even individual spools vary, so treat these as starting points and run a quick temperature tower to lock in the sweet spot for your printer.

Ranges checked against Bambu Lab, Prusament and Polymaker data. Heat resistance is the heat deflection temperature (HDT). Read our Polycarbonate (PC) filament guide for bed adhesion, drying, troubleshooting, and material-specific tips.

Nozzle Compatibility

This is an unfilled plastic, so it is not abrasive: a brass nozzle works and lasts, and so does hardened steel. With hardened steel, print about 5 to 10°C hotter.

Based on Bambu Lab and Prusa guidance. More in our nozzle types guide.